Yamaha recalls MT09ATR β Engine stall
Defect: Due to an improper ECU program vehicles may be affected by engine stalling or limited throttle response. Remedy: Apply…
2,942 recalls found β Medium risk
Defect: Due to an improper ECU program vehicles may be affected by engine stalling or limited throttle response. Remedy: Apply…
Defect: The design trim on the power unit can become detached from its retainers. Remedy: The design trim on the…
Defect: On affected vehicles engine compartment covers were fitted that regardless of use (very sporty driving style or poor road…
Defect: On certain vehicles the length of the wiring harness of the front wheel speed sensors might not meet the…
Defect: The rubberised low-pressure fuel feed hose assembly may have been incorrectly routed during manufacture Remedy: Inspect the low-pressure fuel…
Defect: The wiring harness for the horn may not be durable enough.οΏ½ Remedy: Replace the horn and bracket on all…
Defect: The connection between the driver airbag and the occupant restraint controller may not been fully engaged. Remedy: Check resistance…
Defect: The nuts on the 48V battery poles may not be torqued to specification. Remedy: Remove both positive and negative…
Defect: The external door handle sliders might not be manufactured to the correct specification. Remedy: Check the production date stamped…
Defect: The HV batteries may fail due to impurities in the production process. Remedy: The affected high-voltage cell modules will…
Defect: The anticipated endurance of the connecting rod cannot be ensured. Remedy: Conduct a replacement of the CDI control unit…
Defect: The anticipated endurance of the connecting rod cannot be ensured. Remedy: Conduct a replacement of the CDI control unit…
Defect: The front modular bench seat headrests may not be to specification and might not be locked correctly. Remedy: Check…
Defect: The anticipated endurance of the connecting rod cannot be ensured. Remedy: Conduct a replacement of the CDI control unit…
Defect: Driver does not receive any support from the Blind Spot Assistance System within the system limits. Remedy: The parameter…
Defect: Mandatory label may be missing at vehicle charging inlet Remedy: Install the decal in the front side of the…
Defect: On certain bikes the annulus gear a component of the wheel hub may loosen during operation causing abnormal contact…
Defect: The electrical wire for the belt-fastened sensor was not routed according to specifications and can potentially make direct contact…
Defect: The heat insulation of the resin hose for the oil cooler outlet pipe is insufficient. Remedy: The oil cooler…
Defect: On certain vehicles the software of the communication module might not meet specifications. Remedy: As a precautionary measure update…