3,260 recalls found
Defect: The bolted connection of the pull rod between the electromechanical brake servo and brake pedal may come loose resulting…
Defect: The bolted connection of the pull rod between the electromechanical brake servo and brake pedal may come loose resulting…
Defect: The bolted connection of the pull rod between the electromechanical brake servo and brake pedal may come loose resulting…
Defect: The locking mechanism for the electrical connector of the side crash sensors might not meet specifications. Remedy: Check the…
Defect: Vehicles may have received a version of the ESP Software application that has not been customized for upfitted vehicles…
Defect: The brake hose of the front axle could touch and chafe the wheel housing interior lining. Remedy: Exchange the…
Defect: The Right-Hand Rear Brake Caliper could fail during an activation of the parking brake. Remedy: Inspect and where necessary…
Defect: There is the possibility that the B+ cables were wrongly connected at the B+ distributor and that the fuses…
Defect: Rear brake hoses installed on a specific batch of bikes may be subject to damage to the flexible plastic…
Defect: The throttle speed control stop can break if the throttle speed control bracket is contacted with excessive force. Remedy:…
Defect: A value was incorrectly stated for the hydraulic braked trailer mass when processing the EU type approval. Remedy: Distribution…
Defect: Portable fire extinguishers may not have been fitted with the lock nut on the strike knob. Remedy: Check the…
Defect: The front seat belts may not be properly anchored due to a manufacturing error. Remedy: Check the front seat…
Defect: The hydraulic power steering return line hoses may detach at their connection points under certain operating conditions and may…
Defect: The fuel hose of the affected vehicles may have been manufactured larger than design specification. Remedy: Replace the fuel…
Defect: On vehicles manufactured within a specific period a brake servo which has a manufacturing discrepancy may have been fitted.…
Defect: The banjo bolt that is fitted between the flexi-hose and the caliper within the brake assembly on each corner…
Defect: Incorrect software parameters may have been released for the Chassis Control Module of certain vehicles fitted with standard (passive)…
Defect: Improved locking split pins for the brake pad holding brackets in the front and rear brake calipers are available…
Defect: Vehicles may have incorrectly mounted brake pad holding bracket locking split pins. Remedy: The brake pad holding bracket locking…